SecureAgePlus Multi-Engine Antivirus Review

SecureAgePlus Introduction

This antivirus has actually been around for quite a while, but it hasn’t really interested me because the old interface was a bit clumsy and the scanning reliability was rather poor.

But that has changed quite dramatically with version 4.4 (I’m reviewing 4.4.1). The interface is now incredibly pleasant to use, has a logical layout and most importantly, they seem to have resolved scanning reliability as well. Universal AV is fast and reliable now and they have also replaced VirusTotal multi-engine online scanning service with Jotti, which is an older service with a bit less scanners, but it seems to be a lot faster and reliable. I do hope VirusTotal will one day return to assist Jotti scanner, but it’s still very good as it is right now.

SecureAgePlus_GUI.png
Main SecureAgePlus Interface
SecureAgePlus_GUI_Settings.png
SecureAgePlus Settings panel with few of Universal AV engines listed

Universal AV

This antivirus is a bit special. It uses local antivirus of your choice or you can also use integrated one (ClamAV, very basic, but it works), but its special sauce lays or shall I say floats in the cloud in form of two services. One is Universal AV which depends on several antivirus engines running on SecureAPlus servers, placing ZERO load on your system. All is done through intelligent fingerprinting, you only have to submit whole EXE to their server for analysis if no fingerprint is found on their server to match the potential malware on your system. After few seconds, results are returned to you and you can decide what to do if found to be potentially malicious.

SecureAgePlus_GUI_Detection.png

Second line of defense from the cloud is Jotti’s service, again with multi-engine scan service which at the moment boasts 19 different antivirus scan engines.

SecureAgePlus_GUI_Detection2.png

In theory, not even two such services can deliver absolute 100% protection, but with so many engines, chances of malware evading all of them becomes very slim. And given you don’t experience any slowdowns on your system, the more engines there is, the better.

Multi-layered Protection

Another good thing about it is that you can use it along with your favorite existing antivirus. I personally don’t trust ClamAV all that much, so I’m using avast! instead of ClamAV. They can run both together without problems. I had to exclude avast! main folder in SecureAgePlus because it was asking about one avast! file, but after I’ve done that, it seems to work fine.

Whitelisting

To even further extend the security, SecureAgePlus also relies on whitelisting and certificates to lower false positives as well as give you more clues whether you should trust a file or not. Unfortunately it is not possible to disable whitelist, which makes it tiny bit annoying if one wants to only use it as a pure second opinion antivirus and nothing else.

SecureAgePlus_GUI_Whitelisting.png
SecureAgePlus Whitelisting Panel

Licensing model

SecureAge is using an interesting Freemium licensing model. In a nutshell, it’s free for initial 1 year and it can be free beyond that if you’re willing to invest some time into promoting it. Either by posting about it on social media, writing testimony, review (like this one) and simply spread a word about it. If you’re not willing to do all this, you can also decide to support it directly with a Premium license. If you want to give it a try, make sure to use my referral link below and help me out receiving points so I can extend my Freemium license.

My referral link: Download here and receive 15 months free license

Like I’ve said, on install you get 1 year free and fully functional antivirus, so you don’t have anything to lose really and you help me out at the same time. Give it a try and see for yourself how it works and how effective it is.

Few minor dislikes…

After all the praising, there always comes that “but”. Luckily, it’s nothing major really. Only things that are a bit annoying is that you can’t install ClamAV directly from within SecureAgePlus interface if you’ve deselected it during initial installation. You have to run installer again and check it there. Would be a lot more convenient if there was an option for that already inside interface. Next thing I don’t like it a bit is the fact that you can’t disable Application Whitelisting service entirely and use SecureAgePlus only as a second opinion scanner, you can only adjust it to be more permissive. You always have to deal with whitelisting dialogs if some new app isn’t yet whitelisted. Can be a bit annoying sometimes. there is also no On-Demand scan option within main interface, other than Full System scan. You have to use Explorer context menu to scan individual folders. And lastly, initial scan takes VERY long even on top of the line system with very fast SSD as it’s main and only drive. I’m guessing it has to hash all files on the drive for Whitelisting to work, so be prepared to leave system on for SecureAgePlus to finish this first scan. After that is done, all consecutive Full System scans are done in few seconds.

Pros:

  • multi-engine scanning
  • very high detection rate
  • very small performance footprint despite multiple engines
  • very nice and logical interface
  • functional with other security software with minimal effort
  • Free for 1 year plus option for free extension

Cons:

  • very long initial scan even on top end system
  • a bit clumsy later installation of optional local ClamAV scan engine
  • no On-Demand scan options other than context menu scan and Full System scan
  • cannot disable Whitelisting part entirely and only use it as second opinion AV only
  • still giving user a final word whether to trust or block a file despite scan verdicts (may be risky with some users who don’t understand scan results)

Verdict

All in all, it’s a very interesting and effective security software. It’s not flawless, but the flaws it has are very minor despite making a “Cons” list rather long. I’m pretty sure they’ll fix or improve most of these in the future. And even if they don’t, I can safely assume most people wouldn’t mind if these remain as they are just things I personally disliked a bit. They probably won’t even bother most users. Give it a try and decide for yourself. I really like it now and I think I’ll keep it as second line of defense next to avast!.đŸ™‚

Links

SecureAge Official webpage

Download (with referral link)

2 thoughts on “SecureAgePlus Multi-Engine Antivirus Review

  1. Unfortunately MS did not recognized it as an AV. So immidiately comes defender in action. But secure age plus never endet his first check of my device. Sorry

    Like

    1. You need to install it with Offline antivirus. If you haven’t, just re-run the installer and select Offline antivirus. This will recognize it as stand alone AV and disable Defender. If you use SecureAge as secondary like I do along avast!, then don’t install offline av.

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s